Module @stacks/stacking

@stacks/stacking npm

Library for PoX Stacking.

Installation 

npm install @stacks/stacking

Initialization

Initialize a StackingClient to interact with the Stacking contract.

Note: The StackingClient sets its transactions AnchorMode to Any by default.

import { StacksTestnet, StacksMainnet } from '@stacks/network';
import { StackingClient } from '@stacks/stacking';

// for mainnet: const network = new StacksMainnet();
const network = new StacksTestnet();
// the stacks STX address
const address = 'ST3XKKN4RPV69NN1PHFDNX3TYKXT7XPC4N8KC1ARH';
const client = new StackingClient(address, network);

Signing

Coming with epoch 2.5 and Nakamoto, stackers are required to include signer signatures for their stacking transactions. Signers need to be run along side Stacks nodes to participate in the PoX consensus.

The StackingClient provides a helper method to create a signer signature for a stacking transaction.

// the id of the current cycle
const currentCycle = 83;
// a BTC address for reward payouts
const poxAddress = 'mvuYDknzDtPgGqm2GnbAbmGMLwiyW3AwFP';
// number cycles to stack
const cycles = 3;
// how much to stack (at most), in microSTX
const maxAmount = 100000000000n;
// the auth id of the signer (a random id to not allow reusing the signature)
const authId = 702;

const signerPrivateKey = makeRandomPrivKey(); // replace with your signer private key

const signature = client.signPoxSignature({
  topic: 'stack-stx', // the topic of the transaction
  poxAddress,
  rewardCycle: currentCycle,
  period: cycles,
  maxAmount,
  authId,
  signerPrivateKey,
});

[!WARNING] Make sure to replace signerPrivateKey with the signer private key of your setup and keep it private.

Topics

Signatures include a topic, so they can only be used for the intended transaction type. The following topics are available:

  • stack-stx
  • stack-extend
  • stack-increase
  • agg-commit
  • agg-increase

Stack STX

Check stacking eligibility

// a BTC address for reward payouts
const poxAddress = 'mvuYDknzDtPgGqm2GnbAbmGMLwiyW3AwFP';
// number cycles to stack
const cycles = 3;

// Refer to initialization section to create client instance
const stackingEligibility = await client.canStack({ poxAddress, cycles });

// {
//   eligible: false,
//   reason: 'ERR_STACKING_INVALID_LOCK_PERIOD',
// }

Build and broadcast a solo-stacking transaction

[!NOTE] For the cycles given, the signer-key cannot be changed.

// a BTC address for reward payouts
const poxAddress = 'mvuYDknzDtPgGqm2GnbAbmGMLwiyW3AwFP';
// number cycles to stack
const cycles = 3;
// how much to stack, in microSTX
const amountMicroStx = 100000000000n;
// private key for transaction signing
const privateKey = 'd48f215481c16cbe6426f8e557df9b78895661971d71735126545abddcd5377001';
// block height at which to stack
const burnBlockHeight = 2000;
// signature `maxAmount`
const maxAmountMicroStx = amountMicroStx;
// signature `authId` (random id)
const authId = 3;

// signer key
const signerPrivateKey = makeRandomPrivKey();
const signerKey = getPublicKeyFromPrivate(signerPrivateKey.data);

// Refer to initialization section to create client instance

// Generate the signer signature
const signerSignature = client.signPoxSignature({
  topic: 'stack-stx',
  rewardCycle: await client.getPoxInfo().reward_cycle_id,
  poxAddress,
  period: cycles,
  maxAmount,
  authId,

  signerPrivateKey,
});

// Build and broadcast the stacking transaction
const stackingResult = await client.stack({
  amountMicroStx,
  poxAddress,
  cycles,
  burnBlockHeight,

  signerKey,
  signerSignature,
  maxAmountMicroStx,
  authId,

  privateKey,
});

// {
//   txid: '0xf6e9dbf6a26c1b73a14738606cb2232375d1b440246e6bbc14a45b3a66618481',
// }

Extend stacking

Extends previously stacked funds without cooldown.

// number cycles to extend stacking by
const extendCycles = 3;
// a BTC address for reward payouts
const poxAddress = 'mvuYDknzDtPgGqm2GnbAbmGMLwiyW3AwFP';
// private key for transaction signing
const privateKey = 'd48f215481c16cbe6426f8e557df9b78895661971d71735126545abddcd5377001';
// signature `maxAMount`
const maxAmountMicroStx = 100000000000n;
// signature `authId` (random id)
const authId = 4;

// signer key
const signerPrivateKey = makeRandomPrivKey();
const signerKey = getPublicKeyFromPrivate(signerPrivateKey.data);

// Refer to initialization section to create client instance
// Generate the signer signature
const signerSignature = client.signPoxSignature({
  topic: 'stack-extend',
  poxAddress,
  period: extendCycles,
  maxAmount,
  authId,

  signerPrivateKey,
});

// Build and broadcast the stacking transaction
const extendResult = await client.stackExtend({
  extendCycles,
  poxAddress,

  signerKey,
  signerSignature,
  maxAmount,
  authId,

  privateKey,
});

// {
// txid: '0xf6e9dbf6a26c1b73a14738606cb2232375d1b440246e6bbc14a45b3a66618481',
// }

Increase amount stacked

Increases the amount of funds stacked/locked after previously stacking.

// how much to increase by, in microSTX
const increaseBy = 3000000;
// private key for transaction signing
const privateKey = 'd48f215481c16cbe6426f8e557df9b78895661971d71735126545abddcd5377001';
// signature `maxAmount`
const maxAmount = increaseBy;
// signature `authId` (random id)
const authId = 5;

// signer key
const signerPrivateKey = makeRandomPrivKey();
const signerKey = getPublicKeyFromPrivate(signerPrivateKey.data);

// Refer to initialization section to create client instance
// Generate the signer signature
const signerSignature = client.signPoxSignature({
  topic: 'stack-increase',
  poxAddress,
  period: extendCycles,
  maxAmount,
  authId,

  signerPrivateKey,
});

// Build and broadcast the stacking transaction
const increaseResults = await client.stackIncrease({
  increaseBy,

  signerKey,
  signerSignature,
  maxAmount,
  authId,

  privateKey,
});

// {
//   txid: '0xf6e9dbf6a26c1b73a14738606cb2232375d1b440246e6bbc14a45b3a66618481',
// }

Client helpers

Will Stacking be executed in the next cycle?

const stackingEnabledNextCycle = await client.isStackingEnabledNextCycle();

// true / false

How long (in seconds) is a Stacking cycle?

const cycleDuration = await client.getCycleDuration();

// 120

How much estimated time is left (in seconds) to submit a stacking transaction for the upcoming reward cycle?

const seconds = await client.getSecondsUntilStackingDeadline();

// 600000

Does account have sufficient STX to meet minimum threshold?

const hasMinStxAmount = await client.hasMinimumStx();

// true / false

Get PoX info

const poxInfo = await client.getPoxInfo();

// {
//   contract_id: 'ST000000000000000000002AMW42H.pox',
//   first_burnchain_block_height: 0,
//   min_amount_ustx: 83335083333333,
//   prepare_cycle_length: 30,
//   rejection_fraction: 3333333333333333,
//   reward_cycle_id: 17,
//   reward_cycle_length: 120,
//   rejection_votes_left_required: 0,
//   total_liquid_supply_ustx: 40000840000000000
// }

Get Stacks node info

const coreInfo = await client.getCoreInfo();

// {
//   peer_version: 385875968,
//   pox_consensus: 'bb88a6e6e65fa7c974d3f6e91a941d05cc3dff8e',
//   burn_block_height: 2133,
//   stable_pox_consensus: '2284451c3e623237def1f8caed1c11fa46b6f0cc',
//   stable_burn_block_height: 2132,
//   server_version: 'blockstack-core 0.0.1 => 23.0.0.0 (HEAD:a4deb7a+, release build, linux [x86_64])',
//   network_id: 2147483648,
//   parent_network_id: 3669344250,
//   stacks_tip_height: 1797,
//   stacks_tip: '016df36c6a154cb6114c469a28cc0ce8b415a7af0527f13f15e66e27aa480f94',
//   stacks_tip_consensus_hash: 'bb88a6e6e65fa7c974d3f6e91a941d05cc3dff8e',
//   unanchored_tip: '6b93d2c62fc07cf44302d4928211944d2debf476e5c71fb725fb298a037323cc',
//   exit_at_block_height: null
// }

Get account balance

const responseBalanceInfo = await client.getAccountBalance();

// 800000000000

Get account balance locked

const responseBalanceLockedInfo = await client.getAccountBalanceLocked();

// 40000000000

Get account balances (from API)

const responseBalancesInfo = await client.getAccountExtendedBalances();

// {
//   stx: {
//     balance: '1000000',
//     total_sent: '0',
//     total_received: '1000000',
//     lock_tx_id: '0xec94e7d20af8979b44d17a0520c126bf742b999a0fc7ddbcbe0ab21b228ecc8c',
//     locked: '50000',
//     lock_height: 100,
//     burnchain_lock_height: 100,
//     burnchain_unlock_height: 200,
//   },
//   fungible_tokens: {},
//   non_fungible_tokens: {},
// }

Get account stacking status

const stackingStatus = await client.getStatus();

// {
//   stacked: true,
//   details: {
//     first_reward_cycle: 18,
//     lock_period: 10,
//     unlock_height: 3020,
//     pox_address: {
//       version: '00',
//       hashbytes: '05cf52a44bf3e6829b4f8c221cc675355bf83b7d'
//     }
//   }
// }

Get PoX operation info (current period and PoX contract versions)

const poxOperationInfo = await client.getPoxOperationInfo();

// {
//   period: 'Period3',
//   pox1: {
//     contract_id: 'ST000000000000000000002AMW42H.pox',
//     activation_burnchain_block_height: 0,
//     first_reward_cycle_id: 0,
//   },
//   pox2: {
//     contract_id: 'ST000000000000000000002AMW42H.pox-2',
//     activation_burnchain_block_height: 120,
//     first_reward_cycle_id: 25,
//   },
// }

Delegated stacking

These are the methods for creating the required transactions for delegated stacking:

sequenceDiagram
  User->>Stacks Blockchain: tx: `delegateStx`<br>Delegate funds to pool,<br>by pool's STX address
  Stacks Blockchain-->Pool Operator: Monitored by
  Pool Operator->>Stacks Blockchain: tx: `delegateStackStx`<br>Lock delegated funds
  Pool Operator->>Stacks Blockchain: tx: `stackAggregationCommit`<br>Commit stacking for each cycle

Stacking in a pool

If you are the account owner ("stacker"), you can delegate or revoke delegation rights.

Delegate STX

// STX address of the pool/pool
const delegateTo = 'ST2MCYPWTFMD2MGR5YY695EJG0G1R4J2BTJPRGM7H';
// burn height at which the delegation relationship should be revoked (optional)
const untilBurnBlockHeight = 5000;
// how much to stack, in microSTX
const amountMicroStx = 100000000000n;
// private key for transaction signing
const privateKey = 'd48f215481c16cbe6426f8e557df9b78895661971d71735126545abddcd5377001';

const delegetateResponse = await client.delegateStx({
  amountMicroStx,
  delegateTo,
  untilBurnBlockHeight, // optional
  privateKey,
});

// {
//   txid: '0xf6e9dbf6a26c1b73a14738606cb2232375d1b440246e6bbc14a45b3a66618481',
// }

Revoke delegation

// private key for transaction signing
const privateKey = 'd48f215481c16cbe6426f8e557df9b78895661971d71735126545abddcd5377001';

const revokeResponse = await client.revokeDelegateStx(privateKey);

// {
//   txid: '0xf6e9dbf6a26c1b73a14738606cb2232375d1b440246e6bbc14a45b3a66618481',
// }

Operating a pool / Stacking for others

If you are a pool operator (or wish to stack with someone else's funds), you can stack ("lock up") tokens for your users and commit to stacking participation for upcoming reward cycles. These users need to first "delegate" some or all of their funds to you (the "pool"). The following examples refer to the "delegate" as pool, but in practice a delegator can also stack for only single or few individuals. Even a group of friends could stack together and share a multi-sig BTC wallet for payouts.

Stack delegated STX

Stack STX, which have been previously delegated to the pool. This step only locks the funds (partial stacking) and doesn't require a signer-key/signature yet. The pool operator will also need to "commit" to a reward cycle.

import { getNonce } from '@stacks/transactions';
import { StacksTestnet, StacksMainnet } from '@stacks/network';
import { StackingClient } from '@stacks/stacking';

// for mainnet: const network = new StacksMainnet();
const network = new StacksTestnet();
// the stacks STX address
const address = 'ST3XKKN4RPV69NN1PHFDNX3TYKXT7XPC4N8KC1ARH';
// pools would initiate a different client
const poolAddress = 'ST22X605P0QX2BJC3NXEENXDPFCNJPHE02DTX5V74';
// pool private key for transaction signing
const poolPrivateKey = 'd48f215481c16cbe6426f8e557df9b78895661971d71735126545abddcd5377001';
// the BTC address for reward payouts
const poolBtcAddress = 'msiYwJCvXEzjgq6hDwD9ueBka6MTfN962Z';
// how much to stack, in microSTX
const amountMicroStx = 100000000000n;
// block height at which to stack
const burnBlockHeight = 2000;
// number cycles to stack
const cycles = 3;
// if you call this method multiple times in the same block, you need to increase the nonce manually
const nonce = await getNonce(poolAddress, network);

const poolClient = new StackingClient(poolAddress, network);

const delegetateStackResponses = await poolClient.delegateStackStx({
  stacker: address,
  amountMicroStx,
  poxAddress: poolBtcAddress,
  burnBlockHeight,
  cycles,
  privateKey: poolPrivateKey,
  nonce, // optional
});

// {
//   txid: '0xf6e9dbf6a26c1b73a14738606cb2232375d1b440246e6bbc14a45b3a66618481',
// }

Extend delegated STX

Extend stacking of STX previously delegated to the pool.

import { getNonce } from '@stacks/transactions';
import { StacksTestnet, StacksMainnet } from '@stacks/network';
import { StackingClient } from '@stacks/stacking';

// for mainnet: const network = new StacksMainnet();
const network = new StacksTestnet();
// the stacks STX address
const address = 'ST3XKKN4RPV69NN1PHFDNX3TYKXT7XPC4N8KC1ARH';
// pools would initiate a different client
const poolAddress = 'ST22X605P0QX2BJC3NXEENXDPFCNJPHE02DTX5V74';
// pool private key for transaction signing
const poolPrivateKey = 'd48f215481c16cbe6426f8e557df9b78895661971d71735126545abddcd5377001';
// the BTC address for reward payouts
const poolBtcAddress = 'msiYwJCvXEzjgq6hDwD9ueBka6MTfN962Z';
// number of cycles to extend by
const extendCount = 3;
// if you call this method multiple times in the same block, you need to increase the nonce manually
const nonce = await getNonce(poolAddress, network);

const poolClient = new StackingClient(poolAddress, network);

const delegetateExtendResponses = await poolClient.delegateStackExtend({
  extendCount,
  stacker: address,
  poxAddress: poolBtcAddress,
  privateKey: poolPrivateKey,
  nonce, // optional
});

// {
//   txid: '0xf6e9dbf6a26c1b73a14738606cb2232375d1b440246e6bbc14a45b3a66618481',
// }

Increase delegated STX

Increase the locked amount of delegated STX stacked.

import { getNonce } from '@stacks/transactions';
import { StacksTestnet, StacksMainnet } from '@stacks/network';
import { StackingClient } from '@stacks/stacking';

// for mainnet: const network = new StacksMainnet();
const network = new StacksTestnet();
// the stacks STX address
const address = 'ST3XKKN4RPV69NN1PHFDNX3TYKXT7XPC4N8KC1ARH';
// pools would initiate a different client
const poolAddress = 'ST22X605P0QX2BJC3NXEENXDPFCNJPHE02DTX5V74';
// pool private key for transaction signing
const poolPrivateKey = 'd48f215481c16cbe6426f8e557df9b78895661971d71735126545abddcd5377001';
// the BTC address for reward payouts
const poolBtcAddress = 'msiYwJCvXEzjgq6hDwD9ueBka6MTfN962Z';
// amount to increase by, in microSTX
const increaseBy = 3;
// if you call this method multiple times in the same block, you need to increase the nonce manually
const nonce = await getNonce(poolAddress, network);

const poolClient = new StackingClient(poolAddress, network);

const delegetateIncreaseResponses = await poolClient.delegateStackIncrease({
  increaseBy,
  stacker: address,
  poxAddress: poolBtcAddress,
  privateKey: poolPrivateKey,
  nonce, // optional
});

// {
//   txid: '0xf6e9dbf6a26c1b73a14738606cb2232375d1b440246e6bbc14a45b3a66618481',
// }

Commit to stacking

The result of this commit transaction will contain the index of the pools reward set entry.

// reward cycle id to commit to (not the current cycle)
const rewardCycle = 12;
// the BTC address for reward payouts
const poolBtcAddress = 'msiYwJCvXEzjgq6hDwD9ueBka6MTfN962Z';
// Private key
const poolPrivateKey = 'd48f215481c16cbe6426f8e557df9b78895661971d71735126545abddcd5377001';
// signature `maxAmount`
const maxAmountMicroStx = 100000000000n;
// signature `authId` (random id)
const authId = 7;

const signerPrivateKey = makeRandomPrivKey();
const signerKey = getPublicKeyFromPrivate(signerPrivateKey.data);

// Generate the signer signature
const signerSignature = poolClient.signPoxSignature({
  topic: 'agg-commit',
  poxAddress: poolBtcAddress,
  rewardCycle,
  period: 1, // always 1 for agg-commit
  maxAmount,
  authId,

  signerPrivateKey,
});

const delegetateCommitResponse = await poolClient.stackAggregationCommitIndexed({
  poxAddress: poolBtcAddress,
  rewardCycle,

  signerKey,
  signerSignature,
  maxAmount,
  authId,

  privateKey: poolPrivateKey,
});

// {
//   txid: '0xf6e9dbf6a26c1b73a14738606cb2232375d1b440246e6bbc14a45b3a66618481',
// }

Increase existing commitment

Increase partially stacked STX via the index of the reward set entry.

// reward cycle id to commit to
const rewardCycle = 12;
// reward set entry index (returned from the original stackAggregationCommitIndexed transaction)
const rewardIndex = 3;
// the BTC address for reward payouts
const poolBtcAddress = 'msiYwJCvXEzjgq6hDwD9ueBka6MTfN962Z';
// Private key
const privateKeyDelegate = 'd48f215481c16cbe6426f8e557df9b78895661971d71735126545abddcd5377001';
// signature `maxAmount`
const maxAmountMicroStx = 100000000000n;
// signature `authId` (random id)
const authId = 8;

const signerPrivateKey = makeRandomPrivKey();
const signerKey = getPublicKeyFromPrivate(signerPrivateKey.data);

// Generate the signer signature
const signerSignature = poolClient.signPoxSignature({
  topic: 'agg-increase',
  poxAddress: poolBtcAddress,
  rewardCycle,
  period: 1, // always 1 for agg-increase
  maxAmount,
  authId,

  signerPrivateKey,
});

// Build and broadcast the stacking transaction
const delegetateIncreaseResponse = await poolClient.stackAggregationIncrease({
  poxAddress: poolBtcAddress,
  rewardCycle,
  rewardIndex,

  signerKey,
  signerSignature,
  maxAmount,
  authId,

  privateKey: privateKeyDelegate,
});

// {
//   txid: '0xf6e9dbf6a26c1b73a14738606cb2232375d1b440246e6bbc14a45b3a66618481',
// }

Pool helpers

Get burnchain rewards
import { StacksTestnet, StacksMainnet } from '@stacks/network';
import { StackingClient } from '@stacks/stacking';

const address = 'myfTfju9XSMRusaY2qTitSEMSchsWRA441';
// for mainnet: const network = new StacksMainnet();
const network = new StacksTestnet();
const client = new StackingClient(address, network);
const options = { limit: 2, offset: 0 };

const rewards = await client.getRewardsForBtcAddress(options);

// {
//   limit: 2,
//   offset: 0,
//   results: [
//     {
//       canonical: true,
//       burn_block_hash: '0x000000000000002083ca8303a2262d09a824cecb34b78f13a04787e4f05441d3',
//       burn_block_height: 2004622,
//       burn_amount: '0',
//       reward_recipient: 'myfTfju9XSMRusaY2qTitSEMSchsWRA441',
//       reward_amount: '20000',
//       reward_index: 0
//     },
//     {
//       canonical: true,
//       burn_block_hash: '0x000000000000002f72213de621f9daf60d76aed3902a811561d06373b2fa6123',
//       burn_block_height: 2004621,
//       burn_amount: '0',
//       reward_recipient: 'myfTfju9XSMRusaY2qTitSEMSchsWRA441',
//       reward_amount: '20000',
//       reward_index: 0
//     }
//   ]
// };
Get burnchain rewards total
import { StacksTestnet, StacksMainnet } from '@stacks/network';
import { StackingClient } from '@stacks/stacking';

const address = 'myfTfju9XSMRusaY2qTitSEMSchsWRA441';
// for mainnet: const network = new StacksMainnet();
const network = new StacksTestnet();
const client = new StackingClient(address, network);

const total = await client.getRewardsTotalForBtcAddress();
// {
//   reward_recipient: 'myfTfju9XSMRusaY2qTitSEMSchsWRA441',
//   reward_amount: '0'
// }
Get burnchain reward holders
import { StacksTestnet, StacksMainnet } from '@stacks/network';
import { StackingClient } from '@stacks/stacking';

const address = 'myfTfju9XSMRusaY2qTitSEMSchsWRA441';
// for mainnet: const network = new StacksMainnet();
const network = new StacksTestnet();
const client = new StackingClient(address, network);
const options = { limit: 2, offset: 0 };

const rewardHolders = await client.getRewardHoldersForBtcAddress(options);
// {
//   limit: 2,
//   offset: 0,
//   total: 46,
//   results: [
//     {
//       canonical: true,
//       burn_block_hash: '0x000000000000002083ca8303a2262d09a824cecb34b78f13a04787e4f05441d3',
//       burn_block_height: 2004622,
//       address: 'myfTfju9XSMRusaY2qTitSEMSchsWRA441',
//       slot_index: 1
//     },
//     {
//       canonical: true,
//       burn_block_hash: '0x000000000000002083ca8303a2262d09a824cecb34b78f13a04787e4f05441d3',
//       burn_block_height: 2004622,
//       address: 'myfTfju9XSMRusaY2qTitSEMSchsWRA441',
//       slot_index: 0
//     }
//   ]
// };
Get reward set by index
import { StacksTestnet, StacksMainnet } from '@stacks/network';
import { StackingClient } from '@stacks/stacking';

const address = 'myfTfju9XSMRusaY2qTitSEMSchsWRA441';
// for mainnet: const network = new StacksMainnet();
const network = new StacksTestnet();
const client = new StackingClient(address, network);

const rewardSetItem = await client.getRewardSet({
  rewardCyleId: 49,
  rewardSetIndex: 3,
});

// {
//   pox_address: {
//     version: 0,
//     hashbytes: [ 67, 89, 107, 83, 134, 244, 102, 134, 62, 37, 101, 141, 223, 148, 189, 15, 173, 171, 0, 72 ]
//   },
//   total_ustx: 1875230000000000
// }

Index

Enumerations

Pox4SignatureTopic

Classes

InvalidAddressError StackingClient

Interfaces

CanLockStxOptions ContractVersion CycleInfo DelegateStackExtendOptions DelegateStackIncreaseOptions DelegateStackStxOptions DelegateStxOptions LockStxOptions Pox4SignatureOptions PoxInfo RewardSetInfo RewardSetOptions StackAggregationCommitOptions StackAggregationIncreaseOptions StackExtendOptions StackIncreaseOptions StackingEligibility

Type Aliases

DelegationInfo PoxOperationInfo StackerInfo

Functions

decodeBtcAddress extractPoxAddressFromClarityValue getErrorString pox4SignatureMessage poxAddressToBtcAddress poxAddressToTuple signPox4SignatureHash unwrap unwrapMap verifyPox4SignatureHash

Settings

Member Visibility

Theme

On This Page

Generated using TypeDoc